Atlas Copco electronikon IV controller has the following functions:
Efficient automatic control:
The air compressor equipped with elektronikon IV controller can maintain the pressure set by the program through automatic loading and unloading; when the power supply is insufficient, the air compressor will stop automatically; when the pressure decreases, it can also start by itself; if the unloading time is too short, the air compressor will continue to operate to ensure the stability of the gas supply system; the elektronikon IV controller solidifies the air compressor The automatic restart function after power failure can be activated as required; after the elektronikon IV controller gives the start command (automatically or manually by the controller), it will enter the automatic operation state.
Powerful protection function:
If some measured values, such as pressure and temperature, exceed the shutdown warning line set by the controller, the air compressor equipped with elektronikon IV controller will alarm and stop automatically; when some parts such as air filter, oil filter and oil separator need to be replaced or some other minor faults occur, the elektronikon IV controller will send out an alarm signal.
Good monitoring function:
When the air compressor is running, the elektronikon IV controller can monitor the air compressor in real time through sensors.
Multi computer joint control function:
Elektronikon IV controller has the function of multi machine joint control, which can realize the joint control of four air compressors.
Powerful network function:
Can network is the basis of using elektronikon IV controller to build the network. In theory, it can connect 32 devices. The network is established in the control layer, and then connected to the network using different protocols such as Modbus protocol, PROFIBUS protocol and Ethernet protocol through different communication expansion modules. It can also communicate with the upper computer.